Pinhole-free smooth spreading polyester body filler with effortless feather-edging and superior adhesion to bare steel, galvanized sheets, and aluminum.
Parisha Lightweight Polyester Body Filler is a premium two-component repair compound formulated with advanced vacuum-processed hollow glass microspheres. It spreads with a creamy, butter-like consistency, fills deep imperfections without sagging, cures tack-free in 20 minutes, and sands effortlessly to an ultra-fine, razor-thin feather edge without pinholes.
From minor door dings and hail damage to deep collision metal shaping and fiberglass panel repairs in UAE garages.
Modern vehicles utilize mixed metal body shells. Parisha Lightweight Putty contains reactive adhesion promoters that adhere tenaciously to untreated bare steel, hot-dip galvanized steel, electro-galvanized panels, and automotive aluminum alloys without peeling.
Fill pulled dents and welded metal seams up to 10 mm depth in a single application without cracking, shrinking, or sagging.
Engineered for high flexibility on lightweight aluminum hoods, roof panels, and luxury European vehicle bodies.
Applies as an ultra-fine skimming glaze to eliminate minor stone chips, microscopic pinholes, and deep sandpaper gouges.
Ideal for fiberglass custom body kits, spoiler mouldings, commercial refrigerated truck bodies, and marine gelcoat fairing.
Ensure maximum bonding strength and prevent edge swelling by following our technical mixing and sanding protocol.
| Substrate Material | Surface Abrasion | BPO Hardener % | Cure Time @ 25°C | Sanding Sequence |
|---|---|---|---|---|
| Bare Mild Steel Panel | Degrease + Dry sand P80 grit | 2% BPO Paste | 15 – 20 Minutes | P80 → P120 → P240 |
| Galvanized Steel (HDG & EG) | Solvent wipe + Dry sand P120 | 1.5% – 2% BPO Paste | 20 Minutes | P120 → P180 → P240 |
| Automotive Aluminum Alloy | Degrease + Non-woven scuff / P120 | 2% BPO Paste | 20 Minutes | P120 → P180 → P240 |
| Fiberglass GRP & SMC | Dry sand P120 – P180 grit | 2% BPO Paste | 15 Minutes | P120 → P180 → P320 |
Engineered to reduce sanding fatigue, prevent costly re-work from pinholes, and speed up turnaround times.
Formulated with micro-balloon fillers that cut effortlessly with sanding blocks, reducing technician physical fatigue by 40%.
Vacuum homogenization eliminates entrapped micro air bubbles, preventing pinholes that show up after primer surfacer application.
Cures to a completely dry, non-sticky surface that won't smear or clog fresh sanding paper even in humid workshop bays.
Resists cracking and brittleness under intense GCC engine bay temperatures and direct midday summer sun exposure.
High molecular weight polyester resin maintains exact volumetric volume post-cure, preventing visible post-paint repair halos.
Supplied in 3.5kg tins with matched red/blue BPO hardener tubes, plastic spreaders, and direct factory carton discounts in UAE.