Quick-curing, easy-sanding 2K urethane primer with exceptional vertical stability and high film build for body repair panel preparation before basecoat application.
Parisha 2K Urethane Primer Surfacer is an ultra-high solids 2-component primer engineered for rapid collision repair and professional bodywork. Delivers extraordinary vertical stability with zero sagging, effortless dry and wet block sanding without clogging sandpaper, and outstanding resistance to shrinkage and sand-scratch swelling.
Engineered to satisfy high-standard automotive collision repair, classic vehicle restoration, and commercial fleet refinishing throughout the UAE.
When repaired body panels leave pinholes, rough transition borders, or P180 grit sanding gouges, Parisha 2K Primer Surfacer builds up to 180 microns in 3 coats. It sands effortlessly into a razor-flat surface that holds gloss without bullseyes or post-bake sinkage.
Level damaged quarter panels, doors, hoods, and bumpers after metalwork and body filler spreading for seamless OEM contour restoration.
Bridges the microscopic step between bare metal, original primer, polyester putty, and clearcoat without halo marks or edge lifting.
Ideal for multi-stage dry guide-coat block sanding to achieve laser-straight body lines on exotic supercars and vintage restorations.
High vertical sag resistance enables rapid application across high square-meter commercial vehicle panels without runs.
Follow our recommended abrasive sequences and drying cycles for maximum speed and adhesion.
| Underlying Substrate | Pre-Sanding Grit | 2K Primer Application | Drying / Curing Time | Final Sanding Grit |
|---|---|---|---|---|
| Polyester Body Filler / Putty | Dry sand with P180 – P240 | 2 to 3 Full Coats (150 µm) | 2.5 Hours @ 25°C / 30m @ 60°C | Dry P400 – P500 / Wet P800 |
| Cured Original OEM Paintwork | Dry sand with P280 – P320 | 1 to 2 Medium Coats (100 µm) | 2 Hours @ 25°C | Dry P400 – P500 |
| Bare Steel / Galvanized Sheet | Degrease + 1K Etch Primer (recommended) | 2 Full Coats (120 µm) | 3 Hours @ 25°C | Dry P400 – P500 |
| Rigid Plastics / GRP / SMC | Plastic primer / Scuff red Scotch-Brite | 2 Coats (+ Elastifier for PP) | 2.5 Hours @ 25°C | Dry P500 / Wet P1000 |
Combines high build power with quick drying and effortless, powder-smooth sanding characteristics.
High pigment volume concentration yields thick, dense films with fewer passes, saving spray gun time and material.
Sands to a fine white powder without loading or gumming up sandpaper, cutting sanding abrasive disc costs by up to 50%.
Formulated with low-shrinkage urethane polymers preventing sand scratch ghosting or ring mapping weeks after customer delivery.
Bakes fully in just 30 minutes at 60°C or 12–15 minutes under short-wave infrared lamps for immediate same-day topcoating.
Inhibits oxidation and moisture penetration on exposed metal edges, maintaining structural integrity in high-salinity coastal areas.
Supplied in convenient 4:1 kits with matched fast, standard, or slow hardeners for year-round UAE temperature flexibility.